As an Amazon Associate I earn from qualifying purchases.1. MeetRade
Adhesive Mounting Tape for Xiaoyi Home Camera Lock Sucker Suction Cup Hook Dashboard Car Mount Holder GoPro Cameras Super Strong Double Sided 3M Sticky Pads 4 Inches by MeetRade 5pcs
MeetRade - 2. Material:3m vhb super strong adhesive, it can help suction cup installs on not totally flat surfaces. 5. Multi-purpose adhesive: this adhesive provide the best solution for your lock sucker hook, car mount and GPS, Phote frame Also other mounting used.
Never fall again! The adhesive is removable and do not leave a residue.
4. Easy to clean: when you no longer need it, just gently buckle it down and slowly pull it up. 1. Where to use? your xiaoyi, gps, cameras, gopro, need to mount up? Your sucker is not strong enough and fall off often? Try MeetRade super strong adhesive for lock sucker. 3. Size: diameter lengthen out to 102MM4 inch square.
2. MeetRade
MeetRade Double Sided Adhesive Mounting Disk Pad for Lock Sucker Suction Cup Hook Dashboard Car Mount Sticker for Xiaoyi xiaomi GPS Sat Nav Dash Cam Action Camera Mounted 8P 6CM
MeetRade - Never fall again! 2. Material:3/m v/h/b super strong adhesive, it can help suction cup installs on not totally flat surfaces.
1. Where to use? your sucker is not strong enough and fall off often? Try MeetRade super strong adhesive for lock sucker. 5. Multi-purpose adhesive: this adhesive provide the best solution for your lock sucker hook, car mount and GPS, Also other mounting used.
3. Size: diameter lengthen out to 60MM2. 36 inch packing include: 8pack. 4. Easy to clean: when you no longer need it, just gently buckle it down and slowly pull it up. The adhesive is easily removable and do not leave a residue.
| Brand | MeetRade |
| Manufacturer | MEETRADE |
| Height | 0.5 cm (0.2 Inches) |
| Length | 12 cm (4.72 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 10 cm (3.94 Inches) |
| Part Number | CLEAR 8CM 6CM |
3. CANOPUS
Thickness 1.1mm Extra Strong VHB 5952 Double Sided Pads for GoPro, SJCAM Home Decor 3M Adhesive Pads for Action Camera Mounts, GoPro Helmet Mount Spare Replacement, CANOPUS Waterproof 3M Sticky Pads
CANOPUS - Please wait before bonding the other side of the tape for the duration given below to let the tape support a maximum weight. The adhesion of advertisement board, stainless steel, sealing and signs. These adhesive foam pads are viscoelastic in nature which gives the foam energy absorbing and stress relaxing features.
The processing and assembly of electronic and digital products, ABS and PVC rocker panels, wheel lip, moldings, nameplate and decoration bar for automobiles. Pressure sensitive adhesive bonds on contact to provide immediate handling strength.
Waiting time: at room temperature, 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. It is also the best and strongest adhesive pad for Home decor. After applying one side of the tape to the desired surface, 75% after 60 minutes, the bond strength will increase as the adhesive flows onto the surface.
Ideal for skiing, mountain biking, water sports, motocross, climbing and other action sports.3m sticky pads with 44mm x 34mm dimension, 1. 1mm thickness and Black colored. Application: action camera mounting, amendment, body side moldings, door edge, LED plate, bundling, for building operations such as heat insulation, connection, home appliances. How to apply: the surface must be dry and clean to maximize adhesive contact.
4. EPLJ
EPLJ 3M VHB Sticky Adhesive,12 pcs Double Sided Adhesive Tape Replacement Set for Helmet Mounts and Action Camera,Sticky Pad for Pop-out Phone Holder,Dash Cam,Car Phone Mount,Rear Riew MirrorClear…
EPLJ - Before sticking, press the other side hard for 5 minutes, you need to clean the surface with an alcohol pad. The double sided adhesive tape fits perfectly with your camera or the base of the helmet holder. Yes, and will not damage the surface to be attached, it will be very easy to tear off, and will not leave residue.
Of course, it has super sticky adhesive and will not easy fall off. Bouble sided adhesive pad replacement set:the size is a double-sided adhesive pad specially designed for professional film practitioners. When you fix it on the device, this does not mean that it is not enough to stick.
The 3m sticky pad sticks to your helmet super strongly, so you don’t have to worry about it falling off. After sticking to one side, the sticking effect is better it is good. The double-sided tape is made of special material PVC.
Genuine 3m vhb sticky adhesive: included 6 pcs 44*34mm double sided adhesive tape and 6 pcs 35*35 mm sticky adhesive pad and 10 pcs alcohol pads. Waterproof and high temperature：the waterproof sticky adhesive will not be affected and fall off regardless of whether it is snowing or raining. The replacement sticky adhesive pad of our handle bracket base can withstand high temperatures above 90 degrees Celsius, your device will not fall off even in the sun. Multiple uses for car, kitchen, tool installation.
| Brand | EPLJ |
| Manufacturer | EPLJ |
| Height | 0.1 cm (0.04 Inches) |
| Length | 3.51 cm (1.38 Inches) |
| Weight | 0.03 kg (0.06 Pounds) |
| Width | 3.51 cm (1.38 Inches) |
| Part Number | 3-M adhesive |
5. MeetRade
Double-Sided Adhesive Disk MeetRade Super Strong 8PCS 70mm And 80mm Circle Heat Resistant Pad Mounting On Dashboard Windshield Dash Cam For Suction Cup Car Phone Holder GPS Camera
MeetRade - After repeated tests, it is still firmly bonded in 60 ℃ high temperature weather. Press down repeatedly to increase the contact of the adhesive with the substrate. Easy to install and remove:easily peel off the release film of the adhesive pads.
When using, first peel off the white release paper, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other side film and stick to your car dashboard.
Wide compatibility:this double sided adhesive disc is universal and can be used for Smartphone/Car Camera/GPS suction mount/shower, transparent super strong double-sided adhesive, waterproof and heat resistant, can help the suction cup holder be fixed on any surface.
Strong adhesion last longer: strong adhesion, installed on the sucker, can hang up10kg, one piece of this double-sided adhesive tape, even in high and low temperature weather, its will not be affected. High temperature resistance no residue:it can be used normally in high temperature and will no drop. Package includes more: 8pcs 4x7cm +4 x 8cm Can be used in more places.
6. Navitech
Navitech Black Water Resistant Hard Digital Camera Case Cover Compatible With The iBEAM TE-DVR-15 Window Mount Dash Cam + DVR
Navitech - 12 month warranty. Clamshell EVA design. Small size makse it easy to put it into any bags or pockets. Internal mesh pocket store small accessories. Hard case to protect your device.
7. Navitech
Navitech Black Water Resistant Hard Digital Camera Case Cover Compatible With The iBEAM TE-DVR-W HD Window Mount Dash Cam + DVR
Navitech - 12 month warranty. Clamshell EVA design. Hard case to protect your device. Internal mesh pocket store small accessories. Small size makse it easy to put it into any bags or pockets.
MeetRade - 2. Material:3m vhb super strong adhesive, it can help suction cup installs on not totally flat surfaces. 5. Multi-purpose adhesive: this adhesive provide the best solution for your lock sucker hook, car mount and GPS, Phote frame Also other mounting used.
MeetRade - Never fall again! 2. Material:3/m v/h/b super strong adhesive, it can help suction cup installs on not totally flat surfaces.
CANOPUS - Please wait before bonding the other side of the tape for the duration given below to let the tape support a maximum weight. The adhesion of advertisement board, stainless steel, sealing and signs. These adhesive foam pads are viscoelastic in nature which gives the foam energy absorbing and stress relaxing features.
EPLJ - Before sticking, press the other side hard for 5 minutes, you need to clean the surface with an alcohol pad. The double sided adhesive tape fits perfectly with your camera or the base of the helmet holder. Yes, and will not damage the surface to be attached, it will be very easy to tear off, and will not leave residue.
Navitech - 12 month warranty. Clamshell EVA design. Small size makse it easy to put it into any bags or pockets. Internal mesh pocket store small accessories. Hard case to protect your device.
