As an Amazon Associate I earn from qualifying purchases.1. Magene
Wireless RPM Sensor Compatible with Android/Iphone and Bike Computer, Bluetooth/ANT+ Bicycle Cadence Sensor Bike Speed Sensor, Magene S3+ Cadence/Speed Sensor for Cycling
Magene - Device when using the bluetooth protocol 1 sensor can ONLY connect to 1 APP or device concurrently; When using ANT+ protocol it can be connected to multiple devices at the same time.
Mode 1 sensor can only select one mode speed or Cadence at the one time. So you need 2 sensors to test both speed and cadence. 1 for speed, 1 for cadence. Battery remove the insulating sheet of the pre-installed battery before usage; re-install the battery to switch between the speed and cadence mode.
Connection when using a smart phone app, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is invalid. Hibernation s3+ sensor will automatically enter the sleep state for 1 minute to save power after the sensor is stationary, the sensor will ONLY start sending broadcasts after it is properly woken-up.
Brand | Magene |
Manufacturer | Magene |
Weight | 0.01 kg (0.02 Pounds) |
Part Number | 3320006 |
Model | 3320006 |
Warranty | 1 year |
2. moofit
Orange, Distance Sensor and Cadence Sensor with IP67 Waterproof Low Energy Technology, moofit CS8 Cycling Cadence Speed Sensor, Bluetooth & ANT+ Wireless Speed
moofit - Real-time data -tracking cadence data in real-time on your bike computer or smartphone with compatible training apps, and new algorithms can provide you with accurate data. Ble 4. 0 & ant+ technology -connect the cadence sensor to your bike computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth.
If you need both speed and cadence data at once, please purchase speed sensor and cadence sensor bundle. Enjoy cycling every day in all extreme weather.
Widely compatible -the cycling sensor is compatible with most mainstream fitness APPs, RideWithGPS, Peloton, Uhr, Openrider, Endomondo, such as Wahoo Fitness, E-lite HRV, Zwift, Cyclemeter, etc.
Ip67 waterproof -the fitting sealing rubber ring effectively prevents water and dust, you can cycle with the bike cadence sensor even on rainy days. Remove the insulating sheet of the pre-installed battery before usage. Note- single cadence sensor can store cadence data easily during cycling. Easy to install -no magnets needed, the cadence sensor can attach to your bike’s crank arm easily.
Brand | moofit |
Manufacturer | Wantacme |
Height | 1 cm (0.39 Inches) |
Length | 3.7 cm (1.46 Inches) |
Width | 3 cm (1.18 Inches) |
Part Number | CS8-C-UK |
Model | Cadence Sensor |
Warranty | 12 months warranty |
3. CooSpo
COOSPO Bike Cadence Speed Sensor BK467, Tracking Cycling Speed and Distance RPM Sensor, Compatible with Zwift Wahoo Peloton Openrider Rouvy APP, Bluetooth ANT+ Cadence Sensor for GPS Bike Computers
CooSpo - Warranty - coospo offers 24-hour technology support and 12-month warranty. Cadence or speed sensor – switch the battery, it will switch between rpm cadence and speed mode. Cadence sensor attaches on crank, blue LED will light up for three seconds on the panel. Compatible app - coospo speed and cadence sensor compatible with most of the fitness APPs, OpenRider, Cyclemeter, Peloton, like Zwift, Rouvy, RideWithGPS, Coosporide.
Attention - if you use wahoo app, you will only can connect 1 pcs coospo bike sensor, Wahoo app can't support connected 2 sensors in the same time for others brand's.
App connection - when using app connection with coospO bike cadence speed sensor, you need to search for the sensors in the APP, searching through the phone system’s Bluetooth setting is invalid. Please reach to us if any question. Two modes can nOT working at the same time.
Rpm cycling sensor - tracking and provide real-time cycling cadence or speed data on your bike computer or smartphone apps with CooSpo bike RPM cycling sensor. And other brand which support bluetooth ant+ protocol. Compatible gps bike computer - coospo BC107 / BC200 Bluetooth & ant - when use bk467 cadence speed sensor bluetooth connection, ONLY connect to 1 APP or device concurrently; When using ANT+ protocol it can be connected to multiple devices at the same time. Speed sensor mounts on the axle with red LED light up for three seconds on panel.
4. CYCPLUS
Bluetooth/ANT+ Magnetless Waterproof Bike Speed/Cadence Sensor, C3, CYCPLUS Cycling Speed OR Cadence Sensor
CYCPLUS - Easy installation: easily attach to your bike with included elastic and double-sIDED TAPE, these sensors are easy to install, no magnet or calibration needed. Ultra small design & long endurance: size only 38mm×29. 5mm×9. 5mm & weight only 9.
2g. Dual-mode sensor: quickly switch between cadence or speed sensor modes by toggling switch to different position. Bluetooth & ant+ multi-protocol: Supports all kinds of equipments and applications which collect speed or cadence data via Bluetooth or ANT+.
Mounts to any bike's wheel hub, maintain and move between bikes. More than products: as a customer-first manufacturer, cycplus's professional technical support team stand behind their products, quickly and efficiently respond to your concerns.
Does not affect the appearance of the bike or add to the riding load. Enjoy 7/24 support and a one-year coverage. Excellent quality and innovative design help you ride scientifically and healthily. 300 hours of use and 300 days of standby time. We're always more than happy to help. When you are not exercising, it will automatically go into sleep mode.
5. LIVLOV
Bluetooth 5.0 ANT+ Wireless Cadence Monitor & IP67 Waterproof RPM Cycling Sensor Compatible with Wahoo Zwift Strava Peloton Garmin Bike Computers, LIVLOV V2 Bike Cadence and Speed Sensor
LIVLOV - Use the coin to unscrew and replace the battery. Lightweight & easy to install: size only 38. 5mm×38mm×12mm & weight only 105g. Please remember to remove the battery insulation sheet before installation. If you encounter any problems during the APP pairing process, RideWithGPS, Peloton, Openrider, please contact us.
After each cycling, please remove the battery to save the battery life. Bluetooth 5. 0 & ant+ technology: use the livlov v2 rpm cycling sensor to accurately track your cycling speed and cadence in real-time. And we provide unlimited replacement batteries within one year. 24 -hour customer service: if you have any questions, please contact us anytime.
Warning tips: you can't pair the two sensors with the Wahoo app at the same time, because Wahoo makes the brand connection restrictions, you can only pair one sensor one time, except for Wahoo itself brand sensors. Ip67 waterproof & dustproof: our bicycle cadence and speed monitor is particularly applied for outdoors uses in bad weather.
Replaceable cr2032 battery: v2 bike speed cadence sensor is equipped with two replaceable cR2032 batteries, battery life up to 300 hours. Fitness apps compatible: the rpm bike speed cadence sensor is compatible with most mainstream iOS and Android fitness apps, Tacx, Strava, Cyclemeter, Zwift, such as Wahoo Fitness, TrainerRoad, Rouvy, etc. Connect the cadence monitor to the bicycle computer/indoor trainer via ANT+ and connect to smart device apps via Bluetooth.
Brand | LIVLOV |
Manufacturer | LIVLOV |
Height | 1 cm (0.39 Inches) |
Length | 4 cm (1.57 Inches) |
Weight | 0.01 kg (0.02 Pounds) |
Width | 1.5 |
Model | V2 |
6. XOSS
XOSS X1 Speed Cadence Sensor for Bike Computer Smart-phone Bluetooth/ANT+ Dual Mode Cycling Bicycle Wireless Cadence/Speed Sensor
XOSS - Connects bike computerlike garmin, xoss g+ etc. Via ant+ or app in mobilelike xoSS, Openrider, Byton, ZWIFT etc. Light weight and easy to install - track the cadence and speed by earth induction, no need MAGNETS.
Use a coin to open the battery cover then reinstall the battery to change the sensor mode. Please set your bike wheel circumference correctly before using as a speed sensor. It is worth noting that the thickness of the sensor is 10 mm, please make sure it fits the size of your bicycle before buying.
We have sold a lot of pieces this product, if you have problems before or after ordering, feel free contact us, we always help you.
If you want know the cadence and speed data at the same time, two sensors are needed. Fix the sensor on the crank -Cadence, fix on hub -Speed. Please make sure the APP you use supports connect two sensors at the same time before order. Via Bluetooth. Low power consumption, 400+ hours working time, 1 x removable 2032 button battery.
7. CooSpo
Bike Cadence Sensor for GPS Bike Computers, CooSpo Cadence Sensor Bike Speed Sensor, Bluetooth & ANT+ Bicycle RPM Sensor, Cycling Speed Sensor Compatible with Zwift/Wahoo/Peloton/Openrider/Rouvy
CooSpo - Two modes can nOT working at the same time. Bluetooth & ant+ compatible - compatible with wireless Bluetooth and ANT+ dual mode technology, it allows you to connect and display data on both smartphones and GPS bike computers in the same time.
Wireless and non-magnetic, IP67 waterproof for rainny riding. Rpm cycling sensor - tracking and provide real-time cycling cadence or speed data on your bike computer or smartphone apps with CooSpo bike RPM cycling sensor. It comes with rubber pad and different size O-ring to help you better fix it on bike.
Cadence sensor attaches on crank, blue LED will light up for three seconds on the panel. App compatible & battery life - work with popular training app including zwift, Rouvy, Openrider, Peloton, TrainerRoad CooSporide, ridewithGPS, CR2032 battery lasts up to 500 hours.
Wahoo app can’t tracking 2 data in the same time even you have 2 sensors. Coospo offer 1 year warranty once the sensor shipped. Speed sensor mounts on the axle with red LED light up for three seconds on panel. Cadence or speed sensor – switch the battery, it will switch between rpm cadence and speed mode. Best design and support – total weight is 9. 5g, easy install.
Brand | CooSpo |
Manufacturer | CooSpo |
Height | 9 cm (3.54 Inches) |
Length | 4 cm (1.57 Inches) |
Weight | 0.02 kg (0.04 Pounds) |
Width | 3.4 cm (1.34 Inches) |
Warranty | 12 MONTH |
8. Polar
Black, Polar 91053157 Speed and Cadence Sensor Bluetooth Smart Set, S
Polar - Works with bluetoothR smart technology. Records pedalling rate, speed and distance, compatible with polar V800 heart rate monitor.
Also compatible with iPhone 4S and Later, and with selected android devices. Set consisting of a speed sensor and a cadence sensor. Small and light with firm bike attachment.
Brand | Polar |
Manufacturer | Polar |
Height | 1.78 cm (0.7 Inches) |
Length | 9.4 cm (3.7 Inches) |
Weight | 0 kg (0 Pounds) |
Width | 28.96 cm (11.4 Inches) |
Part Number | 91053157 |
Model | 91053157 |
9. CYCPLUS
Bluetooth/ANT+ Magnetless Waterproof Bike Speed/Cadence Sensor C3 2PCS, CYCPLUS Cycling Speed and Cadence Sensor
CYCPLUS - It will enter the sLEEP MODE when not in motion. Mounts to any bike's wheel hub, maintain and move between bikes. Excelsior quality and innovative design help you ride scientifically and healthily.
Bluetooth & ant+ multi-protocol: Supports all kinds of equipments and applications which collect speed or cadence data via Bluetooth or ANT+. Dual-mode sensor: quickly switch between cadence and speed sensor modes by toggling switch to different position.
Easy installation: easily attach to your bike with included elastic and double-sIDED TAPE, these sensors are easy to install, no magnet or calibration needed.
Not affect bike appearance and increase cycling burden. 300 hours using time & long endurancE: SIZE only 38mm×29. 5mm×9. 5mm & 300 days standby time. Speed sensor & cadence sensor- package include: 2 pcs speed &cadence, you can use the speed and cadence sensor at the same time. Ultra small design & weight only 9. 2g.
10. CARDIO sport
Cardiosport SOLO Bluetooth ANT+ Bike Speed and Cadence RPM Sensors for, Wahoo, Garmin, iOS/Android, Zwift, Sigma
CARDIO sport - Blue & red LED status indicators. Quality: ipx7 water resistant. Features: track and record speed, distance and Cadence RPM on Bluetooth and ANT+ bike computers and iOS/Android cycling apps.
App compatibility: works with: zwift, Wahoo Fitness, TrainerRoad, Rouvy, Full GAZ and many more. Simply email or call the number in the user manual and we'll be there to help. Customer service: our uk customer service team is here to help walk you through getting started, device compatibility, functional use and any concerns.
Installation: compatible with all crank arms and all front/rear wheel hubs- comes with 3 sizes of ultra-strong rubber bands.
No magnets, no cable ties, takes Seconds To Install. Solo sensors are tough and designed to withstand rain, dirt, bike cleaners and anything you throw at them. Computer compatibility: bluetooth & aNT+ connects to ALL Garmin, Bryton, Sigma, Wahoo, Hammerhead, Stages computers.
Brand | CARDIO sport |
Manufacturer | Cardiosport |
Height | 0.7 cm (0.28 Inches) |
Length | 2.6 cm (1.02 Inches) |
Width | 2.6 cm (1.02 Inches) |
Part Number | Shaboo Prints-1 |
Model | ZA5D-S / ZA5D-C |